install lightning protection Warehouse Chainat Province
Early Streamer Emission (ESE) Lightning Rod Installation
Lightning rod, brand LIVA LAP-AX210, installed on the roof, 20 meters high, using a 5 meter high pole, not pulling the sling
Use a 95 sq.mm. bare copper grounding wire to be inserted into a 1” PVC pipe.
By connecting with insulated terminal connector (ACP CNESE-O CONNECTOR ESE KIT) to connect the cable and lightning rod.
The picture shows a pole 5 meters high without pulling a sling. with a lightning rod (Air terminal lightning system to mast.)
The conduit is hidden inside for beauty. The pole on the building is 20 meters steep, does not pull the rope, can withstand the wind without causing the pole to tilt.
with the technique of fixing the mast on a 20 meter high building by using a 5 meter high mast without pulling a sling (The installation of Support mast)
Reinforced two layers of grip to give strength to withstand strong wind loads.
with the height of the building Here, use bare copper wire No. 95 Sq.mm. strung in 1" PVC pipe.
walk inside to cover the eyes and the beauty of the building
The installation of the Test Box
Use PVC material that is strong and resistant to sunlight. Resistant to rain for more than 10 years
Installation of the grounding system (Grounding system) using ground rods, size 5/8”, length 3 meters
BARE COPPER BARE COPPER electrical connection, size 95 Sq.mm.
Exothermic Welding
Reinforce concrete pond KML GXCIP CONCRETE INSPECTION PIT to make it easier to improve the grounding system in the coming years.
Ground resistance measurement test It is a number within the standard.